LatestVersion: Stable: 0.50a | Beta: 0.50b
 Deutsch English Franšais Hebrew Chinese Traditional Spanish Italian Polish Lithuanian Estonian Danish Swedish Dutch (Netherlands) Portuguese (Brazil) Czech Portuguese - Portuga Russian Catalan Turkish Finnish Romanian Greek Serbian Chinese Simplified 




Get eMule at SourceForge.net. Fast, secure and Free Open Source software downloads


Cuddle eMule
Lucent CellPipe 20A-GX-E HelpNAV
Follow these simple steps to configure your Lucent CellPipe for eMule. This setup assumes you have a PPPOE connection like DSL running.
Start a telnet session with your routers IP. To do so
 

a) Use the Windows Hyper Terminal and type in a Name (does not matter which) for the new session, choose TCP/IP (Winsock) as connection type then enter your router's IP as the host address

  or
  b) Go to Start -> Run -> telnet router's IP
In the telent sessions that starts enter these commands each on a single line:
  pat addpatin pppoe 4662/tcp client's IP
pat addpatin pppoe 4672/udp client's IP
save
   
Router's IP is the IP address of your CellPipe router and client's IP is the IP address of your computer running eMule.

Many thanks to Jarek for this how to.


Translate this page Last Update: 23.07.2003 13:23
The GUI
The Preferences
FAQ
General Information
Ports, Firewalls & Router
 
Firewalls
Routers
 
  General
Solwise SAR-7x5 + Allnet ALL129
Lucent CellPipe 20A-GX-E
SMC Barricade 7004
Linksys BEFSR41
Cisco 677/678
US Robotics Model #8000-02
  Ports
Servers
Features
Troubleshooting
User Made Guides and FAQs
  Beginner's Guide
Network Guide